VPN Case Study Banner

Service Vertical Line Case Studies Vertical Line Technical Docs Vertical Line FAQ Vertical Line URL Links Vertical Line Nav Blank Vertical Line Netgear Demo Vertical Line NETGEAR Forum

ProSafe FVX538 Case Study


XAUTH Setup Documents
"How to setup XAUTH on my ProSafe Router"
Download the instruction-Supplement (480KB) -NEW NEW


Combo Documents
ProSafe VPN Client 10.7.2 <---> ProSafe VPN Firewall FVX538/FVS338/DGFV338
ProSafe VPN Firewall FVX538/FVS338/DGFV338 <---> ProSafe VPN Firewall FVX538/FVS338/DGFV338
ProSafe VPN Firewall FVX538/FVS338/DGFV338 <---> Older Models
ProSafe VPN Firewall FVX538/FVS338/DGFV338 <---> DG834/B/G/GB
( Dynamic WAN IP and Dynamic WAN IP)

Download the instruction-Case Study120(3.0MB)-New & Revised

Note: ProSafe Router screnshot may look different depends on your fimrware. You should still able to configure without a problem


ProSafe FVS318v24 using FVX538 (Static IP and Static IP)
Information on Dynamic IP instead of Static IP usage is noted
This also works with FVM318 router

Download the insturction-Case Study 104(448KB)-REVISED

Check out our download section for DynDNS Updater

-


ProSafe FVS114v1.0_09-beta firmware using FVX538 (Dynamic IP and Static IP)
Note: New latest firmware is tested and works fine
This is common Box to Box VPN tunnel with one side dynamic IP using DynDNS servcies.
Not testes but shoud work with FVS318v3.

Download the instruction-Case Study 105(544KB)
-REVISED


Check out our download section for DynDNS Updater


ProSafe VPN Client 10.3.5 using FVX538 (Dynamic IP and Static IP)
This is common Client to Box VPN tunnel with one side dynamic IP using DynDNS service.

Download the instruction-Case Study 106(544KB)-REVISED


Download preconfigure client policy (Use this to setup this instructions)
Download supplements settings for virtual adpater in vpn client. (16kb)
Check out our download section for DynDNS Updater


ProSafe FVS318v24 using FVX538 behind Router (Static IP and Dynamic IP)
FVX538 <->FVS318 <internet>FVS318V24
I used this setup while I was testing the unit. Server was located behind FVS318V24. This was double NAT on FVX538 side and VPN tunnel was made but only one way communications. You can access the server but pinging from FVS318 wasn't possible since firewall block on FVX538. Just a intersting setup

Download the instruction-Case Study 103(416KB)-REVISED

Check out our download section for DynDNS Updater


IPsecuritas and ProSafe VPN Firewall FVX538/FVS336G IPsec VPN Setup

(Dynamic WAN IP and Static WAN IP)


OPEN SWAN


Download the instruction-Case Study 122(352KB)-NEW & REVISED

VPNCASESTUDY are not specialized in Linux VPN setups. Please visit OPENSWAN for additional assistance.
www.openswan.org

OPEN SWAN Code download






© 2006~2010 VPN Case Study | All Rights Reserved |

Disclaimer: This site has no relationship with Netgear Corporation nor sponsored and endorsed by Netgear Corporation to post these informations. If you feel that this site has represent in manner which does not correspond to "

Trademark & Advertising Guidelines" (section II-B) , please E-mail i....@vpncasestudy.com