VPN Case Study Site

ProsSafe FVS318V3 Case Study

Combo Documents

ProSafe VPN Client 10.7.2 <---> ProSafe VPN Firewall FVX538/FVS338/DGFV338
ProSafe VPN Firewall FVX538/FVS338/DGFV338 <---> ProSafe VPN Firewall FVX538/FVS338/DGFV338
ProSafe VPN Firewall FVX538/FVS338/DGFV338 <---> Older Models
ProSafe VPN Firewall FVX538/FVS338/DGFV338 <---> DG834/B/G/GB
( Dynamic WAN IP and Dynamic WAN IP)

Download the instruction-Case Study120(3.0MB)-New & Revised

Note: ProSafe Router screnshot may look different depends on your fimrware. You should still able to configure without a problem

Linksys RV042 using FVS318v3 (Static IP and Static IP)

This case study is using Linksys RV042 VPN router connecting to FVS318v3. This case study is actual setup for Netgear user who has requested to setup.

Download the instruction-Case Study121(640KB)-New

ProSafe FVS318v3 using FVS318v24 (Dynamic IP and Static IP)

This case study is using FVS318v3 (3.0_16 frimware). Based on this study, using DynDNS Service
wasn’t able to make connection from FVS318v24. Only way is to use static to static tunnel ONLY. Current new firmware is not tested but seen it is now working.

Download the instruction-Case Study 109(416KB)-REVISED

Check out our download section of software DynDNS Updater

ProSafe VPN Client 10.3.5 using FVS318v3 (Dynamic IP and Static IP)

This case study is using FVS318v3 (3.0_16 frimware). Based on this study, using DynDNS Service
Wasn’t able to make connection from VPN Client side as dynamic IP . Only way is to use static to static tunnel ONLY. Current new firmware is not tested but seen it is now working.

Download supplements settings for virtual adpater in vpn client. (16kb)

Check out our download section of software DynDNS Updater